Engineer i, ii, or iii
Company Name:
PNM Resources
POSTING DEADLINE
NOTE: This is a series post. The successful candidate will be hired based on education and experience.
Applications must be submitted by: March 23, 2014
PREFERENCES
Electrical distribution design
Experience providing new electric service to customer
EE, ME or CE
Knowledge / experience with electrical distribution facilities
Construction cost estimating experience
Construction coordination experience
Experience with multiple project simultaneously
Must have valid driver's license
JOB DESCRIPTION
ENGINEER I
Summary:
Under direct supervision, performs assignments designed to develop
engineering
work knowledge and abilities through the application of standard techniques, practices and procedures.
ESSENTIAL DUTIES AND
Responsibilities:
Provides entry-level engineering support for projects that are small and somewhat repetitive in nature
Conducts small or repetitive studies or participates in larger studies where project performance, cost, and scheduling are the key factors of evaluation
Provides basic engineering support to operational areas
Communicates engineering ideas, recommendations and evaluations
Represents the Company in technical matters that are fundamental in nature
Provides entry-level technical support to and interacts with other associates
Uses the Company and industry standards to ensure safety and consistency of engineering results
Provides occasional technical direction and/or activity supervision to contractors and lower-level Company personnel
COMPETENCIES:
Knowledge and ability to apply the appropriate basic and well-established principles, practices and regulations in the incumbents respective discipline
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.)
Demonstrated good leadership skills, self-motivation, and good interpersonal skills
Ability to translate electrical theory and physics to utility application for improving system reliability
Demonstrated confidence working in and around high voltage (up to 345kV) electrical facilities. and equipment
QUALIFICATIONS
MINIMUM EDUCATION AND/OR
Experience:
Bachelors Degree in engineering from a college or university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) and one to three years related experience, or equivalent combination of education and/or experience related to the discipline.
CERTIFICATES, LICENSES, REGISTRATIONS:
Must possess current, legally valid driver s license and meet the Company s driving record requirements.
COMMUNICATION SKILLS:
Ability to read and interpret documents
Ability to write routine reports and correspondence, write speeches, and presentations
Ability to speak effectively before groups of customers, employees, and managers of the organization
computer
SKILLS:
In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, such as Autocad
Working knowledge of operating systems, word processing, database, and spreadsheet software
ANALYSIS AND PROBLEM-SOLVING ABILITY:
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.
PHYSICAL DEMANDS:
This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights.
Protective equipment required: Hard-hat, safety glasses and hearing protection.
WORK ENVIRONMENT:
Time will be divided between office and field, with a majority of time in the office.
Work will be around high voltage electricity, computers, office equipment, and construction equipment.
JOB DESCRIPTION
ENGINEER II
Summary:
Under general supervision, independently evaluates, selects, and applies standard engineering techniques, practices and procedures commonly employed in a specific area of assignment.
ESSENTIAL DUTIES AND
Responsibilities:
Provides the engineering expertise necessary to support intermediate projects that are generally conventional in nature.
Conducts or participates in studies of intermediate size that evaluate performance, cost, and scheduling criteria of a limited number of alternatives.
Applies routine engineering techniques, practices, and procedures in support of operational areas.
Communicates engineering ideas, recommendations, and evaluations effectively to engineering and non-engineering individuals and groups.
Represents the Company in intermediate engineering matters.
Interacts with and provides technical support consistent with the application of well-established standards to other associates.
Participates in the formulation of Company and industry standards.
Provides technical direction and/or activity supervision to contractors and Company personnel as required by specific assignments/projects.
COMPETENCIES:
Knowledge of and ability to apply standard engineering principles, practices and regulations, and economic and decision analysis principles to area problems including, but not limited to, generation, transmission, distribution, fuels, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.).
Demonstrated good leadership skills, self-motivation, and good interpersonal skills.
Ability to translate electrical theory and physics to utility application for improving system reliability.
Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment.
QUALIFICATIONS
MINIMUM EDUCATION AND/OR
Experience:
Bachelor s Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus 2 or more years of engineering experience or 1 or more with a Fundamentals of Engineering certificate or 1 or more years plus a Master s Degree in Engineering.
CERTIFICATES, LICENSES, AND REGISTRATIONS
Fundamentals of Engineering certificate preferred.
Must possess current, legally valid driver s license and meet the Company s driving record requirements.
COMMUNICATION SKILLS:
Ability to read and interpret documents.
Ability to write routine reports and correspondence, write speeches, and presentations.
Ability to speak effectively before groups of customers, employees, and managers of the organization.
COMPUTER SKILLS:
In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, Autocad, Word, Access, Excel, Windows, etc.
ANALYSIS AND PROBLEM-SOLVING ABILITY:
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.
PHYSICAL DEMANDS:
This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective Equipment Required Hard-hat, safety glasses and hearing protection.
WORK ENVIRONMENT:
Time will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity, computers, office equipment, and construction equipment.
DEGREES:
Bachelor of Engineering
LICENSES / CERTIFICATIONS:
Driver's License (Required)
Fundamentals of Engineering Ce
JOB DESCRIPTION
ENGINEER III
Summary:
Under general supervision plans, schedules, conducts, and coordinates the engineering work for a total project of moderate scope or for detailed phases of part of a major project.
ESSENTIAL DUTIES AND
Responsibilities:
Manages all the engineering aspects of projects of moderate scope or detailed phases of major project efforts
Leads or conducts performance, cost, and scheduling studies of varying size that are generally conventional in nature
Supports operational areas through the application of standard and non-standard engineering techniques, practices, and procedures
Communicates engineering ideas, recommendations, and evaluations to diverse internal groups in a working or conference type environment
Represents the company s interests in engineering matters that may be varied and complex in nature
Interacts with and provides broad knowledge technical support to other associates
Applies engineering expertise to improve or develop new standards
Provides technical direction and/or activity supervision to contractors and company personnel on a regular, on-going basis
COMPETENCIES:
Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, ASME, NACE, etc.)
Ability to translate electrical theory and physics to utility application for improving system reliability
Ability to make informed
repair
decisions following company protocols
Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment
Ability to forecast budgets
Demonstrated leadership skills, self-motivation, and interpersonal skills
QUALIFICATIONS
MINIMUM EDUCATION AND/OR
Experience:
Bachelor s Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus four or more years of engineering experience or three or more with a Fundamentals of Engineering certificate or three or more with a Master s Degree in Engineering.
CERTIFICATES, LICENSES, AND REGISTRATIONS
Fundamentals of Engineering certificate is preferred.
Must possess current, legally valid driver s license and meet the Company s driving record requirements.
COMMUNICATION SKILLS:
Ability to read and interpret documents
Ability to write routine reports and correspondence, write speeches, and presentations
Ability to speak effectively before groups of customers, employees, and managers of the organization
COMPUTER SKILLS:
In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs
In depth knowledge of word processing, database, and spreadsheet software
ANALYSIS AND PROBLEM-SOLVING ABILITY:
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.
PHYSICAL DEMANDS:
This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective equipment required: hard-hat, safety glasses and hearing protection.
WORK ENVIRONMENT:
Time will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity facilities, computers, office equipment, and construction equipment.
DEGREES:
Bachelors Degree
LICENSES / CERTIFICATIONS:
Driver's License (Required)
Fundamentals of Engineering Ce
SALARY RANGE
ENGINEER I
Salary Grade: P11
Minimum Midpoint Maximum
$44,133 - $58,843 - $73,554
SALARY RANGE
ENGINEER II
Salary Grade: P12
Minimum Midpoint Maximum
$50,297 - $67,062 - $83,828
SALARY RANGE
ENGINEER III
Salary Grade: P13
Minimum Midpoint Maximum
$57,842 - $77,122 - $96,403
EQUAL OPPORTUNITY STATEMENT
PNM Resources and affiliates are Equal Opportunity/Affirmative Action employers. Women, minorities, disabled individuals and veterans are encouraged to apply.Estimated Salary: $20 to $28 per hour based on qualifications.
PNM Resources
POSTING DEADLINE
NOTE: This is a series post. The successful candidate will be hired based on education and experience.
Applications must be submitted by: March 23, 2014
PREFERENCES
Electrical distribution design
Experience providing new electric service to customer
EE, ME or CE
Knowledge / experience with electrical distribution facilities
Construction cost estimating experience
Construction coordination experience
Experience with multiple project simultaneously
Must have valid driver's license
JOB DESCRIPTION
ENGINEER I
Summary:
Under direct supervision, performs assignments designed to develop
engineering
work knowledge and abilities through the application of standard techniques, practices and procedures.
ESSENTIAL DUTIES AND
Responsibilities:
Provides entry-level engineering support for projects that are small and somewhat repetitive in nature
Conducts small or repetitive studies or participates in larger studies where project performance, cost, and scheduling are the key factors of evaluation
Provides basic engineering support to operational areas
Communicates engineering ideas, recommendations and evaluations
Represents the Company in technical matters that are fundamental in nature
Provides entry-level technical support to and interacts with other associates
Uses the Company and industry standards to ensure safety and consistency of engineering results
Provides occasional technical direction and/or activity supervision to contractors and lower-level Company personnel
COMPETENCIES:
Knowledge and ability to apply the appropriate basic and well-established principles, practices and regulations in the incumbents respective discipline
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.)
Demonstrated good leadership skills, self-motivation, and good interpersonal skills
Ability to translate electrical theory and physics to utility application for improving system reliability
Demonstrated confidence working in and around high voltage (up to 345kV) electrical facilities. and equipment
QUALIFICATIONS
MINIMUM EDUCATION AND/OR
Experience:
Bachelors Degree in engineering from a college or university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) and one to three years related experience, or equivalent combination of education and/or experience related to the discipline.
CERTIFICATES, LICENSES, REGISTRATIONS:
Must possess current, legally valid driver s license and meet the Company s driving record requirements.
COMMUNICATION SKILLS:
Ability to read and interpret documents
Ability to write routine reports and correspondence, write speeches, and presentations
Ability to speak effectively before groups of customers, employees, and managers of the organization
computer
SKILLS:
In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, such as Autocad
Working knowledge of operating systems, word processing, database, and spreadsheet software
ANALYSIS AND PROBLEM-SOLVING ABILITY:
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.
PHYSICAL DEMANDS:
This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights.
Protective equipment required: Hard-hat, safety glasses and hearing protection.
WORK ENVIRONMENT:
Time will be divided between office and field, with a majority of time in the office.
Work will be around high voltage electricity, computers, office equipment, and construction equipment.
JOB DESCRIPTION
ENGINEER II
Summary:
Under general supervision, independently evaluates, selects, and applies standard engineering techniques, practices and procedures commonly employed in a specific area of assignment.
ESSENTIAL DUTIES AND
Responsibilities:
Provides the engineering expertise necessary to support intermediate projects that are generally conventional in nature.
Conducts or participates in studies of intermediate size that evaluate performance, cost, and scheduling criteria of a limited number of alternatives.
Applies routine engineering techniques, practices, and procedures in support of operational areas.
Communicates engineering ideas, recommendations, and evaluations effectively to engineering and non-engineering individuals and groups.
Represents the Company in intermediate engineering matters.
Interacts with and provides technical support consistent with the application of well-established standards to other associates.
Participates in the formulation of Company and industry standards.
Provides technical direction and/or activity supervision to contractors and Company personnel as required by specific assignments/projects.
COMPETENCIES:
Knowledge of and ability to apply standard engineering principles, practices and regulations, and economic and decision analysis principles to area problems including, but not limited to, generation, transmission, distribution, fuels, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.).
Demonstrated good leadership skills, self-motivation, and good interpersonal skills.
Ability to translate electrical theory and physics to utility application for improving system reliability.
Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment.
QUALIFICATIONS
MINIMUM EDUCATION AND/OR
Experience:
Bachelor s Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus 2 or more years of engineering experience or 1 or more with a Fundamentals of Engineering certificate or 1 or more years plus a Master s Degree in Engineering.
CERTIFICATES, LICENSES, AND REGISTRATIONS
Fundamentals of Engineering certificate preferred.
Must possess current, legally valid driver s license and meet the Company s driving record requirements.
COMMUNICATION SKILLS:
Ability to read and interpret documents.
Ability to write routine reports and correspondence, write speeches, and presentations.
Ability to speak effectively before groups of customers, employees, and managers of the organization.
COMPUTER SKILLS:
In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, Autocad, Word, Access, Excel, Windows, etc.
ANALYSIS AND PROBLEM-SOLVING ABILITY:
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.
PHYSICAL DEMANDS:
This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective Equipment Required Hard-hat, safety glasses and hearing protection.
WORK ENVIRONMENT:
Time will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity, computers, office equipment, and construction equipment.
DEGREES:
Bachelor of Engineering
LICENSES / CERTIFICATIONS:
Driver's License (Required)
Fundamentals of Engineering Ce
JOB DESCRIPTION
ENGINEER III
Summary:
Under general supervision plans, schedules, conducts, and coordinates the engineering work for a total project of moderate scope or for detailed phases of part of a major project.
ESSENTIAL DUTIES AND
Responsibilities:
Manages all the engineering aspects of projects of moderate scope or detailed phases of major project efforts
Leads or conducts performance, cost, and scheduling studies of varying size that are generally conventional in nature
Supports operational areas through the application of standard and non-standard engineering techniques, practices, and procedures
Communicates engineering ideas, recommendations, and evaluations to diverse internal groups in a working or conference type environment
Represents the company s interests in engineering matters that may be varied and complex in nature
Interacts with and provides broad knowledge technical support to other associates
Applies engineering expertise to improve or develop new standards
Provides technical direction and/or activity supervision to contractors and company personnel on a regular, on-going basis
COMPETENCIES:
Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations
Ability to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, ASME, NACE, etc.)
Ability to translate electrical theory and physics to utility application for improving system reliability
Ability to make informed
repair
decisions following company protocols
Comfortable working in and around high voltage (up to 345kV) electrical facilities and equipment
Ability to forecast budgets
Demonstrated leadership skills, self-motivation, and interpersonal skills
QUALIFICATIONS
MINIMUM EDUCATION AND/OR
Experience:
Bachelor s Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus four or more years of engineering experience or three or more with a Fundamentals of Engineering certificate or three or more with a Master s Degree in Engineering.
CERTIFICATES, LICENSES, AND REGISTRATIONS
Fundamentals of Engineering certificate is preferred.
Must possess current, legally valid driver s license and meet the Company s driving record requirements.
COMMUNICATION SKILLS:
Ability to read and interpret documents
Ability to write routine reports and correspondence, write speeches, and presentations
Ability to speak effectively before groups of customers, employees, and managers of the organization
COMPUTER SKILLS:
In-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs
In depth knowledge of word processing, database, and spreadsheet software
ANALYSIS AND PROBLEM-SOLVING ABILITY:
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.
PHYSICAL DEMANDS:
This position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective equipment required: hard-hat, safety glasses and hearing protection.
WORK ENVIRONMENT:
Time will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity facilities, computers, office equipment, and construction equipment.
DEGREES:
Bachelors Degree
LICENSES / CERTIFICATIONS:
Driver's License (Required)
Fundamentals of Engineering Ce
SALARY RANGE
ENGINEER I
Salary Grade: P11
Minimum Midpoint Maximum
$44,133 - $58,843 - $73,554
SALARY RANGE
ENGINEER II
Salary Grade: P12
Minimum Midpoint Maximum
$50,297 - $67,062 - $83,828
SALARY RANGE
ENGINEER III
Salary Grade: P13
Minimum Midpoint Maximum
$57,842 - $77,122 - $96,403
EQUAL OPPORTUNITY STATEMENT
PNM Resources and affiliates are Equal Opportunity/Affirmative Action employers. Women, minorities, disabled individuals and veterans are encouraged to apply.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
